Device Control
A very simple library for the management of the WDT on ATSAMD21.
A simple library to activate, reset, deactivate and reactivate the WDT on ATSAMD21. From the original work of MartinL (arduino forum: https://forum.arduino.cc/u/MartinL).
Maintainer: Guglielmo Braguglia
This library is compatible with the samd architecture so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.