Device Control
Library for the VNH3SP30 and VNH5019A-E motor controllers (H-bridge motor driver)
Arduino library for VNH3SP30, VNH2SP30, VNH3ASP30 and VNH5019A-E based motor controller boards. The VNH3SP30 and VNH5019A-E chips contain a full H bridge to drive motors with currents up to 30A. The VNH5019A-E chips are newer and almost identical to the VNH3SP30 chips. The biggest difference is that the VNH5019A-E chips work with 3.3V and 5V logic, while the older VNH3SP30 chips require 5V logic.
Maintainer: Bart Mellink
This library is compatible with the avr, esp32, stm32 architectures so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.