Device Control
Cool code class for driving 4 windings (pins) stepper motors.
Well suitable for 28BYJ-48 + ULN2003 motor/driver. All three stepping methods: Wave, Full Step, Half Step. Sync/async operation. Powering off the motor. Protection against too short duration between steps.
Maintainer: Ilya Sukhodoev (ilyastyudojev@gmail.com)
This library is compatible with the avr architecture so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.