spartan_edge_esp32_boot

Device Control

Enables the use of the Spartan Edge Accelerator's on-board ESP32 to load FPGA bitstream from SD card on boot
Seeed Studio's Spartan Edge Accelerator board includes an ESP32 MCU in addition to the Xilinx Spartan FPGA. This library provides infrastructure to support using the ESP32 to load .bit files from the SD card to the FPGA each time the board boots.

Author: SJ_K

Maintainer: SJ_K

Read the documentation

Go to repository

Compatibility

This library is compatible with all architectures so you should be able to use it on all the Arduino boards.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.