Sensors
A library to drive the Texas Instruments TMP117 by I2C.
Communicates with the TMP117 over I2C to quickly integrate a temperature sensor into your project. The sensor outputs temperature readings with high precision of +/- 0.1°C over the range of -20°C to +50°C with no calibration. The maximum range is from -55°C to 150°C with a slightly lower precision of +/-0.3°C. It also has a very low power consumption which minimizes the impact of self-heating on measurement accuracy. The sensor operates from 1.8V to 5.5V.
Maintainer: SparkFun Electronics
This library is compatible with all architectures so you should be able to use it on all the Arduino boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.