Communication
I2C lib that supports bit banging and hardware support
Tiny and lightweight I2C library for master mode only. It features no RAM usage compared to Arduino Wire (210 bytes) and only 500 bytes programming size compared to around 2000 for Wire. Even bit banging mode runs up to 370 kHz I2C clock frequency on a 16 MHz Arduino.
Maintainer: Bernhard Nebel
This library is compatible with the avr architecture so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.