Communication
A library to decode a known protocol received on a 433 Mhz Radio Frequencies receiver
Use this library to decode a known protocol received on a 433 Mhz Radio Frequencies receiver. You can get protocol timings using RF433any lib then use here here. Advantage of RF433recv is a much lower memory usage.
Maintainer: Sébastien Millet
This library is compatible with the avr, esp32 architectures so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.