RF433any

Communication

A library to decode any protocol received on a 433 Mhz Radio Frequencies receiver
Use this library to decode any protocol received on a 433 Mhz Radio Frequencies receiver. Allow to display low level data (raw code), user level data (code received) and code timings. No pre-defined timings to specify, the library detects it. You can also use its output to use RF433recv library.

Author: Sébastien Millet

Maintainer: Sébastien Millet

Read the documentation

Compatibility

This library is compatible with the avr, esp32, esp8266 architectures so you should be able to use it on the following Arduino boards:

Compatibility Note

Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.