QC3Control

Device Control

Sets the voltage of a Quick Charge 3.0 source.
Makes it possible to for Arduino to control the output voltage of a Quick Charge 3.0 mains charger or powerbank to 5V, 9V, 12V (or 20V if using a class B power source), or any voltage between 3.6V and 12V (20V) by 200mV steps. The source needs to support the Quick Charge 3.0 technology of Qualcomm. This project is based on QC2Control by Timo Engelgeer (Septillion)

Author: Vincent Deconinck

Maintainer: Vincent Deconinck

Read the documentation

Compatibility

This library is compatible with all architectures so you should be able to use it on all the Arduino boards.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.