Device Control
This library enables you to use Interrupt from Hardware Timers on Portenta_H7 board to control multiple servo motors.
This library enables you to use 1 Hardware Timer on an STM32H747XI-based Portenta_H7 board to control 16 or more servo motors.
Maintainer: Khoi Hoang
This library is compatible with the mbed, mbed_portenta, ArduinoCore-mbed architectures so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.