Device Control
This library enables you to use Hardware-based PWM to create and output PWM to pins on an nRF52840-based Nano_33_BLE board.
These PWM channels, using nRF52840 Hardware PWM, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software ir ISR-based PWM, using millis(), micros() or Timer Interrupt. This important feature is absolutely necessary for mission-critical tasks. You can start, stop, change and restore the settings of any PWM channel on-the-fly
Maintainer: Khoi Hoang
This library is compatible with the mbed, mbed_nano architectures so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.