Timing
Arduino library to easily use on/off delays and cycle timers with non-blocking functions.
The library provides a simple on/off delay for digital signals or a cycle timer which creates a periodically output. It keeps track of the elapsed time since the start of the delay or cycle and is non-blocking. The current time gets stored on a change of the input for the delayOnOff() functions to compare it with the given delayOn or delayOff delay times. The cycle functions restart themself without any external input and these create a permanent on/off signal (e.g. blinking LED) or just on trigger cycle (eg. start periodically actions).
Maintainer: Michael Uray
This library is compatible with the avr, esp8266, esp32 architectures so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.