Retrieves the phone number an from an incoming SMS message and stores it in a named array.
SMS.remoteNumber(number, size)
number : char array, a named array that will hold the sender’s number size : int, the size of the array
int In asynchronous mode, remoteNumber() returns 0 if the last command is still executing, 1 if success, and >1 if there is an error. In synchronous mode, it returns 1 if it successfully executes, and 0 if it does not.
#include <MKRGSM.h>
// PIN Number
#define PINNUMBER ""
// initialize the library instance
GSM gsmAccess; // include a 'true' parameter for debug enabled
GSM_SMS sms;
char remoteNumber[20]; // Holds the emitting number
void setup()
{
// initialize serial communications
Serial.begin(9600);
Serial.println("SMS Messages Receiver");
// connection state
boolean notConnected = true;
// Start GSM shield
// If your SIM has PIN, pass it as a parameter of begin() in quotes
while(notConnected)
{
if(gsmAccess.begin(PINNUMBER)==GSM_READY)
notConnected = false;
else
{
Serial.println("Not connected");
delay(1000);
}
}
Serial.println("GSM initialized");
Serial.println("Waiting for messages");
}
void loop()
{
char c;
// If there are any SMSs available()
if (sms.available())
{
Serial.println("Message received from:");
// Get remote number
sms.remoteNumber(remoteNumber, 20);
Serial.println(remoteNumber);
// This is just an example of message disposal
// Messages starting with # should be discarded
if(sms.peek()=='#')
{
Serial.println("Discarded SMS");
sms.flush();
}
// Read message bytes and print them
while(c=sms.read())
Serial.print(c);
Serial.println("\nEND OF MESSAGE");
// delete message from modem memory
sms.flush();
Serial.println("MESSAGE DELETED");
}
delay(1000);
}