Other
Arduino library for MCCI Catena 44xx, 45xx, 46xx and 48xx systems.
This library provides platform support for the MCCI Catena family of IoT systems, based on the Adafruit Feather M0 LoRa, or on the Murata LoRaWAN module. FRAM system configuration, generalized polling, and a number of low-level drivers are included for the peripherals that are included with the system. A non-blocking event-driven USB-serial command interface is also provided, along with a generalized command parsing framework.
Maintainer: MCCI Corporation
This library is compatible with the samd, stm32 architectures so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.