Lepton FLiR Thermal Camera Module Library

Device Control

Library to control a Lepton FLiR (forward looking infrared) thermal camera module from an Arduino-like board (Teensy 3+/ESP32+ minimum).
This library allows communication with boards running a Lepton FLiR thermal camera module. It provides a wide range of functionality from adjustable memory footprint size, adjustable temperature display mode, fast chip select enable/disable routines, to exposing the full functionality of the thermal camera itself.

Author: NachtRaveVL

Maintainer: NachtRaveVL

Read the documentation

Compatibility

This library is compatible with the teensy, esp32 architectures.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.