INA226_WE

Sensors

A library for the INA226 current and power sensor module
It allows to set the resistor size, number of samples per measurement, conversion ranges. You can chose between continous, triggered and power down mode. Conversion ready and limit alert modes are also implemented.

Author: Wolfgang Ewald

Maintainer: Wolfgang Ewald

Read the documentation

Compatibility

This library is compatible with all architectures so you should be able to use it on all the Arduino boards.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.

• 1.2.11 (latest)
• 1.2.10
• 1.2.9
• 1.2.8
• 1.2.7
• 1.2.6
• 1.2.5
• 1.2.4
• 1.2.3
• 1.2.2
• 1.2.1
• 1.2.0
• 1.1.2
• 1.1.1
• 1.1.0
• 1.0.0