Device Control
Firmware for SPI solid state memory (including SRAM, FRAM, EEPROM) devices for Goldilocks Analogue
Firmware to control SPI SRAM, FRAM, and EEPROM as implemented on the Goldilocks Analogue. Also provides Ring Buffer support for all memory types.
Maintainer: Phillip Stevens
This library is compatible with the avr architecture so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.