Device Control
DAC (MCP4822) functions for Goldilocks Analogue
Firmware to control a MCP4822 (12 bit, dual channel, SPI) DAC using the AVR UART MSPI Mode, as implemented on the Goldilocks Analogue. Also provides IIR High, Band, and Low Pass filtering functions.
Maintainer: Phillip Stevens
This library is compatible with the avr architecture so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.