GFX Library for Arduino

Uncategorized

Arduino_GFX is a GFX library for various color displays with various data bus interfaces
Arduino_GFX is a Arduino graphics library. Currently support GC9A01 round display, GC9106, GC9107, HX8347C, HX8347D, HX8352C, HX8357A, HX8357B, HX8369A, ILI6122, ILI9225, ILI9331, ILI9341, ILI9342(M5Stack, ESP32-S3-BOX), ILI9481, ILI9486, ILI9488, ILI9806, JBT6K71, NT35310, NT35510, NT39125, NV3041A, OTM8009A, R61529, RM67162, SEPS525, SSD1283A, SSD1331, SSD1351, ST7735, ST7789, ST7796 and virtually all Raspberry Pi DPI (RGB) display. Tested RGB display: GC9503V, ILI6485, ST7262, ST7701. Currently support software SPI (8-bit and 9-bit), hardware SPI (8-bit, ESP32 also support 9-bit), 8-bit parallel interface(AVR, ESP32, RPi Pico, RTL8720, STM32), 16-bit parallel interface(ESP32 and RPi Pico) and RGB Panel interface(ESP32S3).

Author: Moon On Our Nation

Maintainer: Moon On Our Nation

Read the documentation

Compatibility

This library is compatible with the architecture.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.

• 1.5.0 (latest)
• 1.4.9
• 1.4.8
• 1.4.7
• 1.4.6
• 1.4.5
• 1.4.4
• 1.4.3
• 1.4.2
• 1.4.1
• 1.4.0
• 1.3.9
• 1.3.8
• 1.3.7
• 1.3.6
• 1.3.5
• 1.3.4
• 1.3.3
• 1.3.2
• 1.3.1
• 1.3.0
• 1.2.9
• 1.2.8
• 1.2.7
• 1.2.6
• 1.2.5
• 1.2.4
• 1.2.3
• 1.2.2
• 1.2.1
• 1.2.0
• 1.1.9
• 1.1.8
• 1.1.7
• 1.1.6
• 1.1.5
• 1.1.4
• 1.1.3
• 1.1.2
• 1.1.1
• 1.1.0
• 1.0.7
• 1.0.5
• 1.0.4
• 1.0.3
• 1.0.1