Communication
IPv6 library for the ENC28J60, W5500 or W5100 Ethernet controllers
A library to allow network communication using IPv6 over Ethernet. Supports a minimal HTTP Server, UDP Client and Server, DNS lookup and SLAAC (Stateless Auto-configuration).
Maintainer: Nicholas Humfrey
This library is compatible with the avr architecture so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.