ESP8266TimerInterrupt

Device Control

This library enables you to use Interrupt from Hardware Timers on an ESP8266-based board.
These ESP8266 Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.

Author: Khoi Hoang

Maintainer: Khoi Hoang

Read the documentation

Compatibility

This library is compatible with the esp8266 architecture.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.