Engineer Regulator

Sensors

Arduino library for temperature controller. Stores settings in EEPROM. Hysteresis. (AVR and ESP)
The temperature controller works with AVR and ESP.Advantages- Controller type (HEATER, COOLER)- Controller mode (Automatic/Manual/Error)(AUTOMODE, MANUALMODE, ERRORMODE)- All settings are stored in the EEPROM- You can configure the output of the Controller to work with forward and reverse logic RLL (Relay Logic Level)- Many examples

Author: EineeringRoom

Maintainer: EngineeringRoom

Read the documentation

Compatibility

This library is compatible with the avr, esp8266 architectures so you should be able to use it on the following Arduino boards:

• Arduino Micro
• Arduino Leonardo
• Arduino Mega
• Arduino Nano
• Arduino Uno
• Arduino Yún

Compatibility Note

Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.

• 1.0.1 (latest)