Signal Input/Output
A library that makes interfacing the DAC7611p a breeze.
The DAC7611p is a 12bit DAC by Texas Instruments, that works off 5 volts. It works on a 3 wire interface.
Maintainer: Souvik Saha
This library is compatible with the avr, megaavr architectures so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.