BlynkEthernet_Manager

Communication

Simple Ethernet Manager for MultiBlynk for Teensy, SAM DUE, SAMD21, SAMD51, nRF52, ESP32, ESP8266, RP2040-based (Nano_RP2040_Connect, RASPBERRY_PI_PICO) boards, etc. with or without SSL, configuration data saved in ESP8266/ESP32 LittleFS, SPIFFS, nRF52/RP2040 LittleFS/InternalFS, EEPROM, DueFlashStorage or SAMD FlashStorage.
Library for configuring/auto(re)connecting Ethernet W5100/W5200/W5500, ENC28J60 or NativeEthernet shields to Ethernet and MultiBlynk at runtime. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic parameters. DoubleDetectDetector is used to force Config Portal opening even if the Credentials are still valid.

Author: Khoi Hoang

Maintainer: Khoi Hoang

Read the documentation

Compatibility

This library is compatible with all architectures so you should be able to use it on all the Arduino boards.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.

• 1.5.2 (latest)
• 1.5.0
• 1.4.0
• 1.3.0
• 1.2.1
• 1.2.0
• 1.1.0
• 1.0.18
• 1.0.17
• 1.0.16
• 1.0.15
• 1.0.14
• 1.0.13
• 1.0.12
• 1.0.11
• 1.0.10
• 1.0.9
• 1.0.8
• 1.0.7
• 1.0.6
• 1.0.5
• 1.0.4