Arduino_NiclaSenseEnv

Device Control

Read sensor data from the Nicla Sense Env board and control the board behaviour.
This library comes with the following features to interact with the Nicla Sense Env board: RGB LED control, Orange LED control, Board control (sleep, reset, factory reset), Board configuration (e.g. changing the I2C address or enabling UART CSV output), Indoor Air Quality Sensor control, Outdoor Air Quality Sensor control, Temperature/Humidity Sensor Control, UART CSV output

Read the documentation

Compatibility

This library is compatible with the samd, mbed_portenta, renesas_portenta, renesas_uno, mbed_nicla, esp32, mbed_nano architectures so you should be able to use it on the following Arduino boards:

• Arduino MKR FOX 1200
• Arduino MKR GSM 1400
• Arduino MKR NB 1500
• Arduino MKR VIDOR 4000
• Arduino MKR WAN 1300 (LoRa connectivity)
• Arduino MKR WAN 1310
• Arduino MKR WiFi 1010
• Arduino MKR ZERO (I2S bus & SD for sound, music & digital audio data)
• Arduino MKR1000 WIFI
• Arduino Nano 33 BLE
• Arduino Nano 33 IoT
• Arduino Zero
• Portenta H7
• Arduino UNO R4 Minima
• Arduino UNO R4 WiFi
• Arduino Nano RP2040 Connect

Compatibility Note

Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.

• 1.0.0 (latest)