Usage
The ArduinoLSM6DS3 library allows you to use the inertial measurement unit (IMU) available on the Arduino® Nano 33 IoT board and the Arduino® UNO WiFi Rev 2 board. The IMU is a LSM6DS3, it has a 3-axis accelerometer and a 3-axis gyroscope. The IMU is connected through I2C on the Nano 33 IoT board’s microcontroller and through SPI on the UNO WiFi Rev. 2 board’s microcontroller. The values returned are signed floats.
To use this library:
#include <Arduino_LSM6DS3.h>
The ArduinoLSM6DS3 library takes care of the sensor initialization and sets its values as follows:
- Accelerometer range is set at ±4 g with a resolution of 0.122 mg.
- Gyroscope range is set at ±2000 dps with a resolution of 70 mdps.
- Output data rate is fixed at 104 Hz.