Arduino_GigaDisplay
Device Control
Examples for GIGA Display Shield
Go to repository
Compatibility
This library is compatible with the mbed_giga
architecture so you
should be able to use it on the
following Arduino boards:
Compatibility Note
Note: while the library is supposed to compile correctly on these architectures,
it might require specific hardware features that may be available only on some boards.
Releases
To use this library, open the Library Manager in
the
Arduino IDE and install it from there.
Usage
Minimal library for controlling the built-in RGB on the GIGA Display Shield via the IS31FL3197 driver (I2C).
To use this library:
#include <Arduino_GigaDisplay.h>
Minimal example:
#include <Arduino_GigaDisplay.h>
GigaDisplayRGB rgb;
void setup() {
rgb.begin();
}
void loop() {
rgb.on(255, 0, 0);
delay(100);
rgb.off();
delay(100);
}
Classes
Methods