Returns the boolean value in the pin connected to the Endstop switch in the motor home.
axis.readEndstopHome()
The signal of the endstop switch in motor home: LOW or HIGH.
#include <Arduino_EMBRYO_2.h>
StepMotor axis(1, A5, 5, 6, 3, 4, A2, A1, 2, 12);
void setup() {
Serial.begin(9600);
while (!Serial) {};
axis.begin();
Serial.println("Endstop Home logic");
Serial.println("Not pressed: " + String(axis.readEndstopHome()));
Serial.println("Pressed: " + String(!axis.readEndstopHome()));
}
void loop() {}