Enables the motor if the motor is initialized.
axis.play()
#include <Arduino_EMBRYO_2.h>
StepMotor axis(1, A5, 5, 6, 3, 4, A2, A1, 2, 12);
void setup() {
Serial.begin(9600);
while (!Serial) {};
axis.begin();
axis.start();
delay(500);
axis.moveSteps(50); // Motor moves
axis.pause(); // Disable motor
axis.moveSteps(50); // Motor does not move
delay(500);
axis.play(); // Enable motor
axis.moveSteps(50); // Motor moves again
}
void loop() {}