Arduino_Braccio_plusplus

Communication

Board support library for the Arduino Braccio++ 6-DOF robot arm.
This library allows you to control the Arduino Braccio++ 6-DOF 2nd generation robot arm.

Read the documentation

Compatibility

This library is compatible with the mbed, mbed_nano architectures so you should be able to use it on the following Arduino boards:

• Arduino Nano 33 BLE
• Arduino Nano RP2040 Connect

Compatibility Note

Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.

• 1.3.3 (latest)
• 1.3.2
• 1.3.1
• 1.3.0
• 1.2.3
• 1.2.2
• 1.2.1
• 1.2.0
• 1.1.0
• 1.0.0