Signal Input/Output
Arduino library for TI ADS1118 (16-Bit Analog-to-Digital Converter with Internal Reference and Temperature Sensor).
This library drives the ADS1118 chip easily. Just configure the ADS1118 as shown in the example code and read temperature and voltage with getTemperature() and getMilliVolts() methods.
Maintainer: Alvaro Salazar
This library is compatible with the avr, esp32 architectures so you should be able to use it on the following Arduino boards:
Note: while the library is supposed to compile correctly on these architectures, it might require specific hardware features that may be available only on some boards.
To use this library, open the Library Manager in the Arduino IDE and install it from there.