This page is also available in 2 other languages
Change language 
English

The Arduino Reference text is licensed under a Creative Commons Attribution-Share Alike 3.0 License.

Find anything that can be improved? Suggest corrections and new documentation via GitHub.

Doubts on how to use Github? Learn everything you need to know in this tutorial.

Last Revision: Searching...

Last Build: 2024/11/08

Edit This Page
Reference > Language > Functions > Advanced io > Pulsein

pulseIn()

[Advanced I/O]

Description

Reads a pulse (either HIGH or LOW) on a pin. For example, if value is HIGH, pulseIn() waits for the pin to go from LOW to HIGH, starts timing, then waits for the pin to go LOW and stops timing. Returns the length of the pulse in microseconds or gives up and returns 0 if no complete pulse was received within the timeout.

The timing of this function has been determined empirically and will probably show errors in longer pulses. Works on pulses from 10 microseconds to 3 minutes in length.

Note
 if the optional timeout is used code will execute faster.

Syntax

pulseIn(pin, value)
pulseIn(pin, value, timeout)

Parameters

pin: the number of the Arduino pin on which you want to read the pulse. Allowed data types: int.
value: type of pulse to read: either HIGH or LOW. Allowed data types: int.
timeout (optional): the number of microseconds to wait for the pulse to start; default is one second. Allowed data types: unsigned long.

Returns

The length of the pulse (in microseconds) or 0 if no pulse started before the timeout. Data type: unsigned long.

Example Code

The example prints the time duration of a pulse on pin 7.

int pin = 7;
unsigned long duration;

void setup() {
  Serial.begin(9600);
  pinMode(pin, INPUT);
}

void loop() {
  duration = pulseIn(pin, HIGH);
  Serial.println(duration);
}

See also