SparkFun u-blox GNSS Arduino Library

Sensors

Library for I2C, Serial and SPI Communication with u-blox GNSS modules
An Arduino Library to support the full range of u-blox GNSS modules, using both NMEA and UBX protocols over I2C, Serial and SPI. Useful for interfacing to the SparkFun GPS-RTK2 ZED-F9P, SparkFun GPS-RTK NEO-M8P-2, SparkFun SAM-M8Q, SparkFun ZOE-M8Q and all the other SparkFun u-blox GNSS Breakouts.The ZED-F9P and NEO-M8P-2 modules are top-of-the-line modules for high accuracy GNSS and GPS location solutions including RTK. The ZED-F9P is unique in that it is capable of both rover and base station operations allowing the module to become a base station and produce RTCM 3.x correction data.Need support for RTK NTRIP Caster services like RTK2go, Emlid Caster and Skylark? This library has functions, callbacks and tried-and-tested examples to let you push RTCM correction data to your module seamlessly!

Author: SparkFun Electronics

Maintainer: SparkFun Electronics

Read the documentation

Compatibility

This library is compatible with all architectures so you should be able to use it on all the Arduino boards.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.

• 2.2.25 (latest)
• 2.2.24
• 2.2.22
• 2.2.21
• 2.2.20
• 2.2.19
• 2.2.18
• 2.2.17
• 2.2.16
• 2.2.15
• 2.2.14
• 2.2.13
• 2.2.12
• 2.2.11
• 2.2.10
• 2.2.9
• 2.2.8
• 2.2.7
• 2.2.6
• 2.2.5
• 2.2.4
• 2.2.3
• 2.2.2
• 2.2.1
• 2.2.0
• 2.1.5
• 2.1.4
• 2.1.3
• 2.1.2
• 2.1.1
• 2.1.0
• 2.0.18
• 2.0.17
• 2.0.16
• 2.0.15
• 2.0.14
• 2.0.13
• 2.0.12
• 2.0.11
• 2.0.10
• 2.0.9
• 2.0.8
• 2.0.7
• 2.0.6
• 2.0.5
• 2.0.4
• 2.0.3
• 2.0.2
• 2.0.1
• 2.0.0