PicoAnalogCorrection

Signal Input/Output

Arduino library to calibrate and improve ADC measurements with the Raspberry Pi Pico including the built-in temp sensor.
Allows simple linear calibration of the Pico's ADC and built-in calculation of the arithmetic mean when reading an analog pin. Also supports temperature reads independent of ADC resolution and reference voltage.

Author: NuclearPhoenix

Maintainer: NuclearPhoenix

Read the documentation

Compatibility

This library is compatible with the rp2040 architecture.

Releases

To use this library, open the Library Manager in the Arduino IDE and install it from there.

• 1.4.0 (latest)
• 1.3.2
• 1.3.1
• 1.3.0
• 1.2.1
• 1.2.0
• 1.1.3
• 1.1.2
• 1.1.1
• 1.0.1
• 1.0.0